EEE and electrical engineering final year projects in Bangalore: 2026 guide
Electrical and Electronics Engineering (EEE) final year projects in Bangalore cover power electronics, motor drives, renewable energy, PLC automation, EV systems and smart grid. These are hardware-first projects — the deliverable is a working physical system tested at rated voltage and current, not a MATLAB simulation.
This guide covers the best EEE project ideas for Bangalore students in 2026, what hardware is involved, and where to build them.
What makes a good EEE final year project?
Hardware first. Simulation is used for design validation before fabrication, but the deliverable is always a working physical unit. A project that exists only in MATLAB is not a final year project.
Tested at rated conditions. Power electronics projects must be tested at the rated voltage and current. A 250W inverter that has only been tested at 10W is not a finished project.
Safety protocols followed. EEE projects involve mains voltage and high currents. A project centre that does not have proper safety protocols is a risk to you and your project.
EEE project ideas for Bangalore students in 2026
Power Electronics:
- [Grid-Tied Solar Micro-Inverter](/projects/eee) — DSP TMS320F28335, IGBT H-bridge, MPPT. Advanced. 5–6 weeks.
- [BLDC Motor Speed Control with PID](/projects/eee) — dsPIC33, MOSFET inverter, Hall sensors. Advanced. 4 weeks.
- [DC-DC Boost Converter with MPPT](/projects/eee) — STM32, synchronous MOSFET, PSIM. Advanced. 4 weeks.
- [Induction Motor Soft Starter](/projects/eee) — Thyristor pairs, PIC18F, custom PCB. Advanced. 4–5 weeks.
- [Automatic Power Factor Correction Unit](/projects/eee) — CT/PT measurement, thyristor contactor. Advanced. 4 weeks.
EV & Battery Systems:
- [EV Battery Management System (BMS)](/projects/eee) — BQ76940, STM32, CAN bus. Advanced. 5 weeks.
Renewable Energy:
- [Wireless Power Transfer Coil System](/projects/eee) — Class-E amplifier, Litz wire coils. Advanced. 4–5 weeks.
PLC & SCADA:
- [PLC-Based Bottle Filling Automation](/projects/eee) — Siemens S7-1200, WinCC HMI. Intermediate. 4–5 weeks.
- [SCADA-Based Load Monitoring Dashboard](/projects/eee) — Ignition SCADA, Modbus RTU. Intermediate. 3–4 weeks.
IoT & Smart Grid:
- [Transformer Health Monitoring over IoT](/projects/eee) — ESP32, MQTT, AWS IoT, scikit-learn. Intermediate. 3–4 weeks.
- [Smart Street Lighting with Adaptive Dimming](/projects/eee) — NB-IoT, DALI dimmer, AWS IoT. Intermediate. 3–4 weeks.
Protection Systems:
- [Three-Phase Fault Detection & Isolation System](/projects/eee) — STM32F4, current transformers, TRIAC. Advanced. 4–5 weeks.
What hardware is involved in EEE projects?
| Project type | Key hardware | Safety requirement |
|---|---|---|
| Grid-tied inverter | IGBT, LCL filter, DSP | Mains isolation, earth leakage protection |
| Motor drive | MOSFET/IGBT inverter, current sensor | Overcurrent protection, thermal shutdown |
| BMS | BMS IC, MOSFETs, CAN transceiver | Cell-level protection, short circuit |
| PLC automation | PLC, HMI, pneumatic actuators | Interlock logic, emergency stop |
| Solar MPPT | Boost converter, MPPT algorithm | Overvoltage, reverse polarity |
IEEE EEE projects available in Bangalore
Several of the projects above are IEEE-based: Grid-Tied Solar Micro-Inverter (IEEE), EV BMS (IEEE), Transformer Health Monitoring (IEEE), Wireless Power Transfer (IEEE), Three-Phase Fault Detection (IEEE), DC-DC Boost Converter (IEEE), Smart Street Lighting (IEEE).
Where to build your EEE project in Bangalore
WEBUILDPRO builds EEE final year projects in our Peenya lab in Bangalore. We work with power electronics at voltages up to 230V AC and 48V DC, support Siemens S7-1200 and Allen-Bradley PLCs, and test every project at rated conditions before delivery.
Browse all EEE project titles or get a free quote. Fixed quote in 24 hours, no obligation.