Civil Project List — WEBUILDPRO, Bangalore

IoT Structural Health Monitoring for Bridges

A wireless sensor network on a 1:20 scale bridge model measuring strain, deflection and vibration under controlled loading. STM32-based nodes transmit via LoRa to a gateway; a Python dashboard visualises real-time structural response and flags anomalies against an ANSYS FEM baseline.

Earthquake-Resistant Shear Wall Analysis

A comparative FEM study in ETABS analysing seismic performance of a G+10 RC frame with three shear wall configurations (core, coupled, perimeter) under IS 1893 Zone III ground motion. Storey drift, base shear and ductility demand are compared across configurations.

Self-Healing Concrete Study

A comparative material study evaluating crack-healing efficiency in concrete specimens incorporating three healing agents: encapsulated sodium silicate, Bacillus subtilis bacterial spores, and polyurethane microcapsules. Crack width, compressive strength recovery and water permeability are measured at 7, 14 and 28 days post-cracking.

Pervious Concrete Mix Design Study

A mix design investigation into pervious concrete using single-sized 10mm and 20mm aggregates with water-cement ratios of 0.30–0.38, measuring permeability coefficient, compressive strength and void ratio. Results are mapped against ASTM C1701 targets for stormwater infiltration applications.

Soil Stabilisation with Industrial Waste

A laboratory investigation into stabilisation of expansive black cotton soil using fly ash, GGBS and lime at varying percentages. CBR, UCS, Atterberg limits and swell pressure are measured for each combination, establishing the optimal blend for sub-grade stabilisation in Karnataka road construction.

Plastic-Waste-Modified Bituminous Road Study

An experimental investigation into the effect of shredded LDPE plastic waste on Marshall stability and flow properties of bituminous concrete mixes. Mix designs with 0%, 4%, 8% and 12% plastic content are prepared, compacted and tested against VG-30 control mix benchmarks.

Traffic Volume & PCU Study with ML Classification

A video-based traffic survey using a fixed camera and YOLOv8 object detection to automatically classify and count vehicles by type (2W, 3W, car, LCV, HCV, bus) at a selected intersection. PCU-weighted flow rates are computed and validated against manual classified counts.

GIS-Based Flood Risk Mapping

A spatial analysis workflow in QGIS integrating DEM data, land use classification, drainage network topology and historical rainfall records to produce a multi-tier flood hazard map for an urban catchment. Sensitivity analysis quantifies how a 20% increase in imperviousness changes the 100-year flood extent.

Rainwater Harvesting Optimisation Model

A site-specific water balance model for a 5,000m² commercial building rooftop catchment that optimises cistern sizing to maximise supply reliability across Bengaluru's bimodal monsoon pattern. Outputs a demand-reliability curve and a 20-year NPV analysis comparing harvesting against municipal supply costs.

Smart Water Distribution Network

An IoT-instrumented scale model of a water distribution network with pressure transducers and flow meters at six nodes, an ESP32 controller managing pump speed via VFD, and a SCADA interface that detects pipe burst events from pressure signature anomalies and isolates the affected zone within 3 seconds.

Mine Gas Detection & Alert System

An underground mine safety system using MQ-series gas sensors (CO, CH4, H2S) and particulate sensors on a ruggedised ESP32 node, with a LoRa uplink to a surface control room. Triggers zone-specific audio/visual alarms and sends SMS alerts when gas concentrations exceed DGMS threshold limits.

BIM 5D Cost Modelling

A full Building Information Model of a G+3 residential structure in Revit, linked to a quantity take-off schedule and MS Project timeline to produce a 5D model that dynamically updates cost estimates when design parameters change. Clash detection reports and construction phasing animations are included.